Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in San Leandro, CA
Most gate access control repairs in San Leandro run $180-$450 for keypad or remote issues, while welding and parts work on older wrought-iron gates typically falls between $220-$680 depending on whether post realignment is needed. We price every job in writing before we start, and we document what we find with photos you keep. Call (510) 944-0953 for a free estimate.
San Leandro’s flatland neighborhoods sit on bay-margin fill with decades of soil settlement, and the salt-laden marine air west of I-880 corrodes gate hardware faster than inland East Bay cities. That combination means we see more post-racking, hinge seizures, and failed circuit boards here than just about anywhere else in Alameda County. We dispatch from our Bay Area office with technicians who carry parts for the nine automation brands we service, including LiftMaster and DoorKing units common on local properties.
Why San Leandro Homes Are Different
San Leandro’s housing stock shapes the gate work we do here. The post-WWII ranch homes in Estudillo Estates, Washington Manor, and along Davis Street were built from the late 1940s through the 1960s with narrow side-yard clearances and original wrought-iron or wood pedestrian gates on brick or poured-concrete posts. Decades of settlement on bay fill have racked many posts out of plumb, so rehang jobs almost always need post realignment or replacement first.
West of I-880, near-daily marine layer and salt-air exposure accelerates rust on wrought-iron panels and corrodes opener circuit boards and battery terminals well ahead of their rated life. The Hayward Fault traces through the eastern hills, contributing to incremental ground movement that shifts posts and causes gates to sag or fail to latch. Meanwhile, the industrial corridor along Davis Street and Marina Boulevard keeps us busy with 30-40-year-old hydraulic and electromechanical swing-gate operators at warehouses and distribution yards, iron that simply doesn’t exist in surrounding residential-heavy cities.
Our Main San Leandro Services
These are the three services San Leandro property owners call us about most often.
Gate Repair in San Leandro
We handle sagging gates, failed latches, corroded hinges, and post settlement on the older homes throughout Estudillo Estates and Washington Manor. Most repair calls here involve realigning gates that no longer close properly due to shifted posts or replacing hardware seized by salt-air corrosion. Gate Repair in San Leandro covers swing, slide, and pedestrian gates on residential and light commercial properties.
Gate Installation in San Leandro
New gate installations in San Leandro require careful measurement of narrow side-yard clearances common to the area’s ranch-home lots, plus assessment of whether existing posts can be salvaged or need replacement due to settlement. We provide a written price and photo documentation before any work begins. Gate Installation in San Leandro includes automated and manual options.
Gate Motor & Opener in San Leandro
We service and replace gate motors and openers on residential driveways and commercial sliding gates throughout the city, including aging operators in the industrial corridor that have cycled well beyond their rated counts. Our technicians carry parts for nine major brands. Gate Motor & Opener in San Leandro covers repair, replacement, and new automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in San Leandro
San Leandro’s mix of post-war residential gates and aging industrial-corridor operators creates specific access-control problems: corroded keypad contacts from salt air, failed remote receivers on 1980s-era electromechanical systems, and intercom wiring degraded by decades of ground movement. We install and repair Gate Access Control systems with the same documentation habit Adrian Vance developed on commercial sites, leaving you a photographed record of every wire run and programming step.
Keypad Entry
Signs you need it
Buttons stick or fail to register, the housing is cracked from UV exposure, or the unit powers on but won’t accept the code after rain.
What it costs in San Leandro
Keypad replacement or repair typically runs $180-$340, with surface-mounted units on the lower end and flush-mounted or weather-rated models higher.
How we do it
We test voltage at the keypad base, photograph the existing wire colors and terminal positions, install the new unit, program up to 25 codes, and leave you a written record of the settings.
Remote Control
Signs you need it
Remotes work intermittently, only from very close range, or not at all despite fresh batteries and visible antenna on the operator.
What it costs in San Leandro
Remote programming or receiver replacement generally costs $140-$280, with multi-button remotes and rolling-code receivers at the upper end.
How we do it
We verify receiver compatibility, clear all stored codes for security, program each remote with a unique identifier, and test range from 50 feet before documenting the serial numbers.
What Gate Access Control Costs in San Leandro
| Item | Typical range in San Leandro |
|---|---|
| Keypad entry repair/replacement | $180 - $340 |
| Remote control programming/receiver | $140 - $280 |
| Phone entry system troubleshooting | $200 - $380 |
Can you add smartphone control to an existing gate in San Leandro?
Yes, most operators made after 2010 can accept a smartphone module; we install the receiver, pair it with your home Wi-Fi, and test cellular access before we leave. Call (510) 944-0953 for a free estimate - estimates are free.
Do San Leandro’s salt-air conditions affect access control lifespan?
Yes, we see keypad contacts and circuit boards fail 2-3 years earlier west of I-880 than in inland areas; we specify marine-grade housings when we replace units in those neighborhoods. Call (510) 944-0953 for a free estimate - estimates are free.
Gate Parts & Welding in San Leandro
San Leandro’s older wrought-iron and steel gates, combined with salt-air corrosion and post settlement from bay-margin fill, keep our welding truck busy. We replace hinges seized solid with rust, realign or replace posts racked out of plumb by decades of soil movement, and fabricate custom brackets when original parts are no longer manufactured. Every weld is photographed, and every part number is recorded under the Haven Standard before we leave your property.
Hinge Replacement
Signs you need it
The gate drags at the bottom, squeals during operation, or the hinge pin is visibly corroded or wobbling in the barrel.
What it costs in San Leandro
Hinge replacement typically runs $220-$420 for residential gates, with heavy-duty or custom-fabricated industrial hinges higher.
How we do it
We support the gate with a temporary brace, cut away the seized hinge, grind the post clean, weld or bolt the new hinge plumb, and photograph the alignment before removing the brace.
Post Replacement
Signs you need it
The post leans visibly, moves when you push the gate, or has cracked at the base where concrete meets soil.
What it costs in San Leandro
Post replacement generally costs $380-$680 depending on depth, concrete footing size, and whether we hit underground utilities.
How we do it
We excavate by hand around the existing post, remove it and the old footing, set a new post with level and bracing, pour concrete, and wait 24 hours before hanging hardware.
What Gate Parts & Welding Costs in San Leandro
| Item | Typical range in San Leandro |
|---|---|
| Hinge replacement (residential) | $220 - $420 |
| Post replacement with concrete footing | $380 - $680 |
| Custom welding/fabrication (hourly) | $180 - $280 |
Can you weld a corroded wrought-iron gate in San Leandro?
Yes, we grind to clean metal, weld with matching rod, and prime the repair immediately; we also flag areas too thin to weld safely and quote panel replacement if needed. Call (510) 944-0953 for a free estimate - estimates are free.
How long does a post replacement take in San Leandro?
Most residential post replacements require two visits: one to remove the old post and set the new one, and a second to hang the gate after the concrete cures; we schedule both before we start. Call (510) 944-0953 for a free estimate - estimates are free.
Brands We Service in San Leandro
We stock parts and service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our San Leandro technicians carry common failure items, keypad housings, and remote receivers on every truck, so most access-control and motor repairs are completed in one visit. our brands
Pricing for Gate Repair in San Leandro, CA
| Service | Typical range in San Leandro |
|---|---|
| Keypad entry repair/replacement | $180 - $340 |
| Remote control programming/receiver | $140 - $280 |
| Phone entry system troubleshooting | $200 - $380 |
| Hinge replacement (residential) | $220 - $420 |
| Post replacement with concrete footing | $380 - $680 |
| Custom welding/fabrication (hourly) | $180 - $280 |
| Card reader repair/replacement | $220 - $400 |
| Video intercom installation | $480 - $920 |
Prices in San Leandro run higher than inland East Bay when we encounter posts racked by settlement or hardware corroded by marine air, since these conditions require additional labor or parts. Every price is written and agreed before we pick up a tool, with no surprise invoice at the end.
Neighborhoods We Serve in San Leandro
We dispatch technicians to all San Leandro neighborhoods, with most calls reached within 45 minutes during business hours and emergency response coordinated through our 24/7 live answering.
- Estudillo Estates
- Washington Manor
- Davis Street corridor
- Marina Boulevard area
- Bay-O-Vista
Service Area - Cities Near San Leandro
Our crews work throughout the East Bay, with regular calls in Oakland, CA, Alameda, CA, Piedmont, CA, and Emeryville, CA. Scheduling and dispatch are coordinated from our Bay Area office, and we do not charge extra for travel to these neighboring cities.
Serving San Leandro, CA - Our Local Coverage Area
We’re based in the San Leandro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Leandro
Most residential gate repairs do not require a permit, but replacement of the supporting posts or installation of a new automated gate may trigger San Leandro building department review; we check permit requirements during our free estimate and handle the paperwork if needed.
Our live answering takes calls 24 hours a day, and we coordinate same-day emergency dispatch for gates that are stuck open or pose a security risk; scheduled non-urgent repairs are typically set within 24-48 hours.
Yes, we work directly with homeowners and with HOA property managers throughout San Leandro; we provide the written documentation and photo records that most HOA boards require for vendor approval and reimbursement.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Leandro Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.